Security Link SL150 Průvodce řešením problémů Strana 79

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 144
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 78
Section 15 -Data Field Descriptions
15–11
87 PAGER #2 PHONE NO.
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing [
]
and next field number. To clear entries from this field, press
87
.
88 PAGER #2 CHARACTERS
| | | | | | | | | | | | | | |
Up to 16 characters may be sent as a prefix to the 7-digit system status code
sent to pager #2 (if used). Phone number in field
87 must have been
entered. If fewer than 16 characters, exit by pressing [
] and next field
number.
To clear entries from this field, press
88
.
The information provided in field
86 for pager #1 also applies here.
89 EVENT LOG 80% FULL REPORT CODE 0 | 0
If an Event Logging selection is made in field
90, a message can be sent to
the Central Station receiver when the log is 80% full. If the log becomes full, a
new message will
overwrite
the oldest message in the log.
NOTE: Aside from the
selection
made by the installer in field
90, all control
and readout from the log is accomplished via the downloader.
90 EVENT LOGGING ENABLE 15
0 = no event logging
1 = log Alarm/Alarm Restore
2 = log Trouble/Trouble Restore
4 = log Bypass/Bypass Restore
8 = log Open/Close
Example: To select “log Alarm/Alarm Restore” and “log Open/Close,” enter 9
(1 + 8); to select all events, enter #15.
The SL150 system can record up to 48 events in a history log. The types of
events to be logged are selectable. At any time, the downloader operator can
then upload the log and view or print out all or selected categories of the log.
The downloader operator can also clear the log.
The display/printout at the Central Station will show the date, time, event,
and description of the occurrences. The time is calculated by an internal clock
at the Central Station computer. Note that the time for any events that occur
prior to a system power-down or an entry into the Programming mode cannot
be calculated by the Central Station computer. The time will then appear on
the log as “unknown.”
NOTE: System messages are logged when any nonzero selection is made.
Zobrazit stránku 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 143 144

Komentáře k této Příručce

Žádné komentáře